Tuesday, August 5, 2008

New Manual Resist Handling Procedures

Hello Photolithographers --

Please be aware of the new handling procedures for manual dispensing of
standard resists. Small, easy-to-handle bottles of standard resists are
provided for your convenience in the small flammables cabinet next to
the wbmiscres/headway2 station (special thanks to Mario, Jim, and
Mahnaz!) Please use these bottles for manual dispensing at the headway2
and laurell stations only. Bottles may be hand-carried and used ONLY AT
HEADWAY OR LAURELL STATIONS. They must be returned to the cabinet when
finished.

The standard resists stocked are: SPR 3612, SPR 3617M, SPR 220-7, SPR
220-3, and LOL 2000. Do not place other resists in this cabinet. (Any
non-standard resist bottles found here will be removed and discarded.)
Be courteous to the next user -- make sure to use care to avoid drips --
and carefully wipe away any that might occur.

We trust that these smaller bottles are safer than handling the large
one-gallon jugs -- and may save people a trip to the back with the
solvent cart.

Your Litho Staff

--
Mary X. Tang, Ph.D.
Stanford Nanofabrication Facility
CIS Room 136, Mail Code 4070
Stanford, CA 94305
(650)723-9980
mtang@stanford.edu
http://snf.stanford.edu

No comments: